[COM] 413 KWS Vue on King William | 89m | 28Lvl | Residential

All high-rise, low-rise and street developments in the Adelaide and North Adelaide areas.
Message
Author
User avatar
Pikey
VIP Member
VIP Member
Posts: 2481
Joined: Wed Jul 13, 2005 7:41 am
Location: Sitting Down

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#766 Post by Pikey » Sun Jun 21, 2015 4:18 pm

I've noticed that on the podium levels that they have decided to paint the concrete between the glazing, which is ok from a distance but up close, cheapens the appearance of the building.

Hopefully the tower section will have traditional glazing rather than the framed glazing being used so far.
Walking on over....

| Sensational-Adelaide.com Moderator |

User avatar
duke
High Rise Poster!
Posts: 412
Joined: Wed Aug 02, 2006 7:15 pm

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#767 Post by duke » Wed Jun 24, 2015 10:28 pm

Smithy85 wrote:
Pikey wrote:The crane should be noticeably taller soon too. I noticed several tower sections had been delivered today.
Crane height increase is happening today. Already obviously taller an hour ago (around 1pm) and they were still going.
Anyone know how they add those additional sections to the crane?

User avatar
AG
VIP Member
VIP Member
Posts: 2093
Joined: Thu Jul 21, 2005 9:44 am
Location: Adelaide SA

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#768 Post by AG » Thu Jun 25, 2015 5:01 am

duke wrote:
Smithy85 wrote:
Pikey wrote:The crane should be noticeably taller soon too. I noticed several tower sections had been delivered today.
Crane height increase is happening today. Already obviously taller an hour ago (around 1pm) and they were still going.
Anyone know how they add those additional sections to the crane?
One of the upper mast sections contains hydraulic jacks which allow the crane to push itself up prior to inserting another mast segment to support the growing crane. Repeated over and over.

cmafra
Sen-Rookie-Sational
Posts: 17
Joined: Mon May 26, 2014 2:07 pm

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#769 Post by cmafra » Thu Jun 25, 2015 2:09 pm

duke wrote:
Smithy85 wrote:
Pikey wrote:The crane should be noticeably taller soon too. I noticed several tower sections had been delivered today.
Crane height increase is happening today. Already obviously taller an hour ago (around 1pm) and they were still going.
Anyone know how they add those additional sections to the crane?

This video shows the details

https://www.youtube.com/watch?v=y39152VWCPk

User avatar
Plasmatron
High Rise Poster!
Posts: 400
Joined: Sun Sep 09, 2007 5:16 pm
Location: St Georges, Adelaide, SA
Contact:

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#770 Post by Plasmatron » Mon Jun 29, 2015 8:11 pm

There are some good city skyline views from the streets near my house, with a particularly clear line of sight towards Vue. I'm thinking of taking a new photo from the same spot, every two weeks, so we can track its growth from a distance. Here's the first one (25/6/2015).
Attachments
Vue-June2015.jpg
Vue-June2015.jpg (209.11 KiB) Viewed 4690 times
Last edited by Plasmatron on Mon Jun 29, 2015 11:23 pm, edited 1 time in total.
https://www.youtube.com/UltraVibeProductions

rev
SA MVP (Most Valued Poster 4000+)
Posts: 6382
Joined: Sat Nov 11, 2006 12:14 pm

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#771 Post by rev » Mon Jun 29, 2015 8:17 pm

Nice one.

arki
High Rise Poster!
Posts: 227
Joined: Mon Dec 15, 2008 2:35 am

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#772 Post by arki » Thu Jul 02, 2015 4:48 pm

Anyone else notice the glass being used on this one? When the first few panels went up I was a bit concerned. Now more have gone up and I'm really getting worried! The brown aluminum frames looks really 70s. Reminds me of the ugly window frames on the Samuel Way court bulding or the festival centre.

I'm confident it will look better when complete and obviously will reserve full judgement for completion but at the moment it doesn't look flattering.

Still gonna be an awesome building though.

User avatar
Nathan
Super Size Scraper Poster!
Posts: 3816
Joined: Tue Feb 03, 2009 1:09 pm
Location: Bowden
Contact:

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#773 Post by Nathan » Thu Jul 02, 2015 5:02 pm

arki wrote:Anyone else notice the glass being used on this one? When the first few panels went up I was a bit concerned. Now more have gone up and I'm really getting worried! The brown aluminum frames looks really 70s. Reminds me of the ugly window frames on the Samuel Way court bulding or the festival centre.

I'm confident it will look better when complete and obviously will reserve full judgement for completion but at the moment it doesn't look flattering.

Still gonna be an awesome building though.
I'm not concerned about brown aluminium frames. As long as it's not the usual silver aluminium frames which every. single. building. seems to use, I'm happy.

User avatar
Pikey
VIP Member
VIP Member
Posts: 2481
Joined: Wed Jul 13, 2005 7:41 am
Location: Sitting Down

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#774 Post by Pikey » Tue Jul 07, 2015 6:58 pm

Now that there's more glass, the podium is looking better. I'm interested to see what the full curtain glazing for the tower section looks like.

From today, the street level bulk of this building is impressive, the floor plates are close to the halfway mark of the total building's height.

Image
Walking on over....

| Sensational-Adelaide.com Moderator |

cyber_256
Sen-Rookie-Sational
Posts: 20
Joined: Mon Dec 12, 2005 4:22 pm
Location: Adelaide

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#775 Post by cyber_256 » Tue Jul 07, 2015 8:39 pm

I work in Vic Sq so I get to watch this one go up, and I am quite impressed with its size. It is most certainly going to add some much needed height to the southern end of the CBD. :D

Patrick_27
Super Size Scraper Poster!
Posts: 2560
Joined: Tue Mar 05, 2013 4:41 pm
Location: Adelaide CBD, SA

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#776 Post by Patrick_27 » Wed Jul 08, 2015 2:42 am

I must say, I find it interesting that instead of setting the upper building back on it's podium that they've set it forward. Usually architects avoid this as to stop the street level from feeling enclosed.

User avatar
[Shuz]
Super Size Scraper Poster!
Posts: 3291
Joined: Sun Apr 10, 2011 5:26 pm

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#777 Post by [Shuz] » Wed Jul 08, 2015 7:12 am

Interestingly, the ACC Development Plan stipulates that buildings within a 'Capital City Zone' (basically the core and the City South section of the CBD) - that buildings should be built right up against to the street to reinforce the built form and grid layout of the city... or something to that effect. So it's a practice that's encouraged, not discouraged. Grenfell Street seems to be the exception... but I think that was under a different planning regime / laws.
Any views and opinions expressed are of my own, and do not reflect the views or opinions of any organisation of which I have an affiliation with.

claybro
Super Size Scraper Poster!
Posts: 2429
Joined: Mon Jun 18, 2012 9:16 pm

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#778 Post by claybro » Wed Jul 08, 2015 10:46 am

[Shuz] wrote:Interestingly, the ACC Development Plan stipulates that buildings within a 'Capital City Zone' (basically the core and the City South section of the CBD) - that buildings should be built right up against to the street to reinforce the built form and grid layout of the city... or something to that effect. So it's a practice that's encouraged, not discouraged. Grenfell Street seems to be the exception... but I think that was under a different planning regime / laws.
And then ACC have used "overshadowing" and "wind tunnel effect" as one of the reasons to reject a building application....Go figure.

User avatar
Pikey
VIP Member
VIP Member
Posts: 2481
Joined: Wed Jul 13, 2005 7:41 am
Location: Sitting Down

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#779 Post by Pikey » Wed Jul 08, 2015 11:01 pm

The first of the glazing brackets have been mounted for the curtain wall cladding.

Also the steel work for the entrance feature is progressing well.
Walking on over....

| Sensational-Adelaide.com Moderator |

User avatar
Plasmatron
High Rise Poster!
Posts: 400
Joined: Sun Sep 09, 2007 5:16 pm
Location: St Georges, Adelaide, SA
Contact:

[COM] Re: 413 KWS Vue on King William | 89m | 28Lvl | Residential

#780 Post by Plasmatron » Sat Jul 11, 2015 2:50 pm

Took this shot yesterday (10/7/2015).
Attachments
Vue-July2015-1.jpg
Vue-July2015-1.jpg (367.92 KiB) Viewed 3569 times
https://www.youtube.com/UltraVibeProductions

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 3 guests