[COM] 316-320 South Terrace | 51m | 14lvls | August Towers
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
I did once see an 18 story building being constructed on the Gold coast using a relatively small ( 50 tonne ) mobile crane on a built up mound of dirt.
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
A mobile crane installed some precast panels for the ground floor today, 26 Aug 16.
- Attachments
-
- 20160826_hutt st 1.jpg (342.28 KiB) Viewed 6783 times
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
A mobile crane has begun erecting steel work for the first 2 levels last week.
- Attachments
-
- 20160908_hutt st xx.jpg (348.98 KiB) Viewed 6582 times
- slenderman
- High Rise Poster!
- Posts: 412
- Joined: Mon Sep 30, 2013 8:44 am
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
I'll add this one I took on Friday. It's a little hard to see in this picture, but it's visible from the steel work and also in the renders that the building curves slightly on the southern face, which I think is a nice touch. Also looking forward to the restoration of the old house, but I imagine that will probably be happening last?
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
Being a steel frame, this one should rise quickly
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
Here is a picture from last week showing the curved steel on the side facing south (towards the parklands ) and an updated picture from today when precast window panels were being lifted into place with a different mobile crane.
- Attachments
-
- 20160918_hutt st 2.jpg (256.32 KiB) Viewed 6537 times
-
- 20160922_hutt st.jpg (132.48 KiB) Viewed 6537 times
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
An update as at 3 Oct 2016 - precast cast panels have been installed on all 4 sides for levels 1 & 2 .
- Attachments
-
- 20161003 hutt st 1.jpg (407.08 KiB) Viewed 6320 times
- slenderman
- High Rise Poster!
- Posts: 412
- Joined: Mon Sep 30, 2013 8:44 am
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
Steel work now taking place on third floor above ground.
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
Level 3 is now complete and steel work is starting on level 4 .Picture Sunday 30 Oct 2016.
- Attachments
-
- 20161030_hutt st.jpg (428.8 KiB) Viewed 5843 times
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
As At Saturday 3 Dec 2016 , steelwork is complete for level 6.
- Attachments
-
- 20161203_hutt st 1.jpg (469.85 KiB) Viewed 5586 times
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
This one has had some amendments and the height is now 51m.
- monotonehell
- VIP Member
- Posts: 5466
- Joined: Fri Feb 01, 2008 12:10 am
- Location: Adelaide, East End.
- Contact:
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
Amendments during construction? Or are we only just finding out about these?Ben wrote:This one has had some amendments and the height is now 51m.
Exit on the right in the direction of travel.
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
During. They haven't been approved yet they are on the DAC website for this Thursdays meeting.monotonehell wrote:Amendments during construction? Or are we only just finding out about these?Ben wrote:This one has had some amendments and the height is now 51m.
- monotonehell
- VIP Member
- Posts: 5466
- Joined: Fri Feb 01, 2008 12:10 am
- Location: Adelaide, East End.
- Contact:
[COM] Re: 316-320 South Terrace | 49m | 14lvls | August Towers
That's weird.Ben wrote:During. They haven't been approved yet they are on the DAC website for this Thursdays meeting.monotonehell wrote:Amendments during construction? Or are we only just finding out about these?Ben wrote:This one has had some amendments and the height is now 51m.
Exit on the right in the direction of travel.
[COM] Re: 316-320 South Terrace | 51m | 14lvls | August Towers
Picture from Sunday 11 Dec 2016, now working on level 7.
- Attachments
-
- 20161211_1hutt st.jpg (466.5 KiB) Viewed 5163 times
Who is online
Users browsing this forum: Plasmatron and 1 guest