News & Discussion: Trams

Threads relating to transport, water, etc. within the CBD and Metropolitan area.
Message
Author
victorious80
Gold-Member ;)
Posts: 92
Joined: Fri Jul 31, 2009 8:33 am

Re: News & Discussion: Trams

#1711 Post by victorious80 » Thu Aug 24, 2017 10:49 pm

Time to focus our thoughts on other things. The poles were old, in very poor condition and had not been designed to carry the loads required by modern light rail overheads. Coming from someone who has the facts. It would've been like knocking down a house from 1895 and building a new two storey house on the old bluestone footings. If the poles could have been reused, they would have.

Also, to give some comfort to those on the forum, a LOT of international and interstate advice was sought for the project. You don't need to physically travel to Europe to get the information you need anymore.

Adelaidean
Sen-Rookie-Sational
Posts: 20
Joined: Mon May 15, 2017 9:37 pm

Re: News & Discussion: Trams

#1712 Post by Adelaidean » Thu Aug 24, 2017 10:51 pm

Time to focus our thoughts on other things. The poles were old, in very poor condition and had not been designed to carry the loads required by modern light rail overheads. Coming from someone who has the facts. It would've been like knocking down a house from 1895 and building a new two storey house on the old bluestone footings. If the poles could have been reused, they would have.

Also, to give some comfort to those on the forum, a LOT of international and interstate advice was sought for the project. You don't need to physically travel to Europe to get the information you need anymore.
Well said.

rubberman
Super Size Scraper Poster!
Posts: 2006
Joined: Tue Sep 04, 2007 10:32 pm
Location: ADL ex DRW, ASP, MGB

Re: News & Discussion: Trams

#1713 Post by rubberman » Fri Aug 25, 2017 7:19 am

victorious80 wrote:
Thu Aug 24, 2017 10:49 pm
Time to focus our thoughts on other things. The poles were old, in very poor condition and had not been designed to carry the loads required by modern light rail overheads. Coming from someone who has the facts. It would've been like knocking down a house from 1895 and building a new two storey house on the old bluestone footings. If the poles could have been reused, they would have.

Also, to give some comfort to those on the forum, a LOT of international and interstate advice was sought for the project. You don't need to physically travel to Europe to get the information you need anymore.
Yes, interesting to see the reaction to a suggestion that maybe we should look at a bit of recycling. Sounds like some raw nerves were touched. :D

I would be far more confident that those planning all this knew what they were doing if it were not for the debacles of the centre island stops and Citadis purchases. Or the apparent non-consideration of standard rail from Whyalla in the Jetty Road relay, vs the imported grooved rail.

The government is fortunate that the Opposition is not interested in trams. Were an even moderately competent opposition party to stand up and ask some questions, bland assurances that overseas advice had been sought would not be enough. Plus, of course, some interstate and overseas advice is better than others: NSW and French/British/US advice met with raucous guffaws of derision, for example. (Although French urban architecture is excellent, tram technology is a work in progress).

Finally, it's admittedly all pretty mickey mouse for a 1.3km extension, but previous history as outlined above gives me only a low degree of confidence that we are on top of the technology of trams here.

User avatar
Norman
Donating Member
Donating Member
Posts: 6488
Joined: Sun Mar 25, 2007 1:06 pm

Re: News & Discussion: Trams

#1714 Post by Norman » Fri Aug 25, 2017 9:10 am

I do wonder how much of the planning and design work gets done at DPTI and how much is done by the private contractors. Does anybody know?

claybro
Super Size Scraper Poster!
Posts: 2429
Joined: Mon Jun 18, 2012 9:16 pm

Re: News & Discussion: Trams

#1715 Post by claybro » Fri Aug 25, 2017 10:21 am

Interesting we gripe about the cost and slow pace of infrastructure projects, when as a nation, we have some of the highest cost of labour in the world, have outsourced most manufacturing overseas, and now have some of the highest energy costs in the world. Australia as a whole is also about to disappear up its own backside in a flurry of compliance, OH&S, red tape, green tape, environmental compliance and over governance on a massive scale. That the discussion has progressed to recycling some rotting old parts, buried underneath North terrace for 60odd years and some old light poles really sums up how we have collectively lost the plot as a modern, progressive place to do business. As for negative comments about the DPTI, well the train and tram upgrades have been beset by problems, and the operation of the existing tram system is a bit of a joke, when we have an example of how to operate a decent tram system, including light rail and street running just a few hundred kilometres up the road in Melbourne, and Perth managed to underground a section of its rail system, in the middle of the CBD, keeping all lines running, with only minimal weekend closures.

citywatcher
Legendary Member!
Posts: 870
Joined: Sun Jul 15, 2007 5:51 pm

Re: News & Discussion: Trams

#1716 Post by citywatcher » Fri Aug 25, 2017 12:36 pm

claybro wrote:Interesting we gripe about the cost and slow pace of infrastructure projects, when as a nation, we have some of the highest cost of labour in the world, have outsourced most manufacturing overseas, and now have some of the highest energy costs in the world. Australia as a whole is also about to disappear up its own backside in a flurry of compliance, OH&S, red tape, green tape, environmental compliance and over governance on a massive scale. That the discussion has progressed to recycling some rotting old parts, buried underneath North terrace for 60odd years and some old light poles really sums up how we have collectively lost the plot as a modern, progressive place to do business. As for negative comments about the DPTI, well the train and tram upgrades have been beset by problems, and the operation of the existing tram system is a bit of a joke, when we have an example of how to operate a decent tram system, including light rail and street running just a few hundred kilometres up the road in Melbourne, and Perth managed to underground a section of its rail system, in the middle of the CBD, keeping all lines running, with only minimal weekend closures.
You forgot the biggest factor
Corporate greed

Sent from my GT-S7275T using Tapatalk


rubberman
Super Size Scraper Poster!
Posts: 2006
Joined: Tue Sep 04, 2007 10:32 pm
Location: ADL ex DRW, ASP, MGB

Re: News & Discussion: Trams

#1717 Post by rubberman » Fri Aug 25, 2017 12:53 pm

claybro wrote:
Fri Aug 25, 2017 10:21 am
Interesting we gripe about the cost and slow pace of infrastructure projects, when as a nation, we have some of the highest cost of labour in the world, have outsourced most manufacturing overseas, and now have some of the highest energy costs in the world. Australia as a whole is also about to disappear up its own backside in a flurry of compliance, OH&S, red tape, green tape, environmental compliance and over governance on a massive scale. That the discussion has progressed to recycling some rotting old parts, buried underneath North terrace for 60odd years and some old light poles really sums up how we have collectively lost the plot as a modern, progressive place to do business. As for negative comments about the DPTI, well the train and tram upgrades have been beset by problems, and the operation of the existing tram system is a bit of a joke, when we have an example of how to operate a decent tram system, including light rail and street running just a few hundred kilometres up the road in Melbourne, and Perth managed to underground a section of its rail system, in the middle of the CBD, keeping all lines running, with only minimal weekend closures.
Claybro, as I have REPEATEDLY said, the issue of recycling poles (Not sleepers) came up as a question of whether or not it had been considered, nothing more. It's a mickey mouse issue in the scheme of things.

The big picture is that SA is looking to spend around $2bn on a tram system. To have any chance of that progressing past a pipe dream, it needs to have a very robust business case.

The evidence to date is that we have had poor design (witness centre island stops), poor planning (witness the need to buy the Citadis in a hurry), and poor vehicle selection (Citadis, based not on technical, financial, or operational considerations).

Given these failures, why should a responsible Federal Government give SA one single cent? Other projects could well have higher priority, and jurisdictions like Perth, which do have their act together DESERVE the funding. Jurisdictions that can't plan or design should be told to improve themselves and not get funding till they do.

Consideration of possible recycling to minimise costs is a tiny tiny part of the whole picture.

nevillness
Sen-Rookie-Sational
Posts: 12
Joined: Mon Mar 31, 2008 8:42 pm

Re: News & Discussion: Trams

#1718 Post by nevillness » Sat Aug 26, 2017 1:48 pm

The original tram system was partly scrapped because the infrastructure degraded to the point that it all needed to be replaced. Why would anything be reused now? It wasn't fit for use back then and its been left to degrade even further for the last 50+ years.

rubberman
Super Size Scraper Poster!
Posts: 2006
Joined: Tue Sep 04, 2007 10:32 pm
Location: ADL ex DRW, ASP, MGB

Re: News & Discussion: Trams

#1719 Post by rubberman » Sat Aug 26, 2017 2:54 pm

nevillness wrote:
Sat Aug 26, 2017 1:48 pm
The original tram system was partly scrapped because the infrastructure degraded to the point that it all needed to be replaced. Why would anything be reused now? It wasn't fit for use back then and its been left to degrade even further for the last 50+ years.
Examples: What would it cost to refurbish and re-use the rail in King William St South? It has plenty of life left on the top, and once the corrugations are removed (that's cheap, and can be done in place), the rail would have another thirty years in it. Savings: no new imported rail. No transport costs, it's on site. That is, easier and cheaper and feasible, but nah, let's just import stuff from overseas, because....

Poles: There's still plenty round the city. They were reused at the St Kilda Tram Museum, and most have lasted forty years next to a saline evaporation lake.

But nah, let's not even think about it. It's only taxpayers' money.

Goodsy
Legendary Member!
Posts: 1107
Joined: Thu Jul 18, 2013 10:39 am

Re: News & Discussion: Trams

#1720 Post by Goodsy » Sat Aug 26, 2017 4:26 pm

might be a silly question, but are the old rails even the right gauge?

User avatar
monotonehell
VIP Member
VIP Member
Posts: 5466
Joined: Fri Feb 01, 2008 12:10 am
Location: Adelaide, East End.
Contact:

Re: News & Discussion: Trams

#1721 Post by monotonehell » Sat Aug 26, 2017 4:31 pm

GoodSmackUp wrote:
Sat Aug 26, 2017 4:26 pm
might be a silly question, but are the old rails even the right gauge?
Well.. they must be because the Glenelg tram is using them today.
Exit on the right in the direction of travel.

User avatar
SouthAussie94
Legendary Member!
Posts: 583
Joined: Tue Mar 27, 2012 10:03 pm
Location: Southern Suburbs

Re: News & Discussion: Trams

#1722 Post by SouthAussie94 » Sat Aug 26, 2017 4:43 pm

rubberman wrote:
Sat Aug 26, 2017 2:54 pm
They were reused at the St Kilda Tram Museum
The requirements at the tram museum are not the same as the requirements for a public transport service. Apples and Oranges..

Why did they demolish the footings of the old Rhino Room? They supported the old building just fine, seems like such a waste that they weren't reused for the new Adelaidean building. Good thing it wasn't taxpayers dollars used...
"All we are is bags of bones pushing against a self imposed tide. Just be content with staying alive"

Views and opinions expressed are my own and don't necessarily reflect the views or opinions of any organisation of which I have an affiliation

citywatcher
Legendary Member!
Posts: 870
Joined: Sun Jul 15, 2007 5:51 pm

Re: News & Discussion: Trams

#1723 Post by citywatcher » Sat Aug 26, 2017 4:49 pm

SouthAussie94 wrote:
rubberman wrote:
Sat Aug 26, 2017 2:54 pm
They were reused at the St Kilda Tram Museum
The requirements at the tram museum are not the same as the requirements for a public transport service. Apples and Oranges..

Why did they demolish the footings of the old Rhino Room? They supported the old building just fine, seems like such a waste that they weren't reused for the new Adelaidean building. Good thing it wasn't taxpayers dollars used...
I note your subtle sarcasm
I don't know what the fuss is all about

Sent from my GT-S7275T using Tapatalk


rubberman
Super Size Scraper Poster!
Posts: 2006
Joined: Tue Sep 04, 2007 10:32 pm
Location: ADL ex DRW, ASP, MGB

Re: News & Discussion: Trams

#1724 Post by rubberman » Sat Aug 26, 2017 9:45 pm

SouthAussie94 wrote:
Sat Aug 26, 2017 4:43 pm
rubberman wrote:
Sat Aug 26, 2017 2:54 pm
They were reused at the St Kilda Tram Museum
The requirements at the tram museum are not the same as the requirements for a public transport service. Apples and Oranges..

Are you sure of that? Apples and oranges how? Carrying passengers for money, railed vehicles of similar weights, same guage, on rails, similar speeds 600 volts DC traction voltage, trolley wire of similar diameters. And if you put a pantograph on any of the tram museum's cars, they could run from Jetty Road to Vic Square, and possibly the Entertainment Centre. The only possible glitch might be getting caught up on the centre islands.

But apart from similar speeds, similar weights, similar duties, same guage, same voltage, similar trolley wire diameter, ability to operate one each other's track, they're completely different. Riiiiiight! :roll:

Oh, and here's a link to an image of a present day Melbourne tram. Note the 100 year old poles holding up the overhead. But yeah. Totally impossible.

http://tdu.to/m/245376/everyday-caulfield

crawf
Donating Member
Donating Member
Posts: 5527
Joined: Thu Feb 16, 2006 7:49 pm
Location: Adelaide

Re: News & Discussion: Trams

#1725 Post by crawf » Sat Aug 26, 2017 10:41 pm

rubberman wrote:
Sat Aug 26, 2017 9:45 pm

Oh, and here's a link to an image of a present day Melbourne tram. Note the 100 year old poles holding up the overhead. But yeah. Totally impossible.

http://tdu.to/m/245376/everyday-caulfield
Seriously... who cares?. Can't believe this is still being discussed. They are just poles.

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], rubberman and 4 guests