Page 93 of 98

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Sun Jul 17, 2016 10:00 pm
by Nathan
Driving over the Morphett St bridge yesterday, it looked like some cladding had been put on the very top surface. Not 100% sure though.

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Sun Jul 17, 2016 11:03 pm
by EBG
Yes cladding is being installed on the roof on the Morphett St side . But the final colour is still not clear due to the temporary protective film. Some more pictures of the East and North sides from Saturday 16 July.

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Sun Jul 17, 2016 11:12 pm
by Nathan
EBG wrote:Yes cladding is being installed on the roof on the Morphett St side . But the final colour is still not clear due to the temporary protective film. Some more pictures of the East and North sides from Saturday 16 July.
What I saw didn't appear to have the protective film on it, it looked like the brown/bronze finish we're expecting.

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Wed Jul 20, 2016 12:23 pm
by Nathan
More of the brown cladding was being installed this morning on the western side, just above the rear of the bistro. Couldn't tell how well it picks up the light though, since being the morning, the sun was behind.
IMG_4541.JPG
IMG_4541.JPG (197.67 KiB) Viewed 5200 times

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Wed Jul 27, 2016 10:48 pm
by EBG
Here are some pictures (Wednesday 27 July) of the brown (not golden) cladding on the roof and the western side. I hope the whole building is not going to be this colour .It appears to be far too dark although it was an overcast (rainy ) day.

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Thu Jul 28, 2016 12:27 am
by thecityguy
Brown!! Ahh this is Vue all over again


Sent from my iPhone using Tapatalk

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Thu Jul 28, 2016 10:39 am
by Llessur2002
I imagine (hope) this is different cladding used for the less conspicuous parts of the building. The fact that it doesn't have the protective wrap of the cladding that's on the other parts of the building gives me hope that the protective wrap is for the shiny stuff and not needed for the brown panels...

Looking at the original render, the bit they're currently cladding on the western side of the building seems to be shown to be clad in a different material to the main structure (albeit grey, not brown) - although the structure has changed somewhat around this area (with the addition of another window?):

Image

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Mon Aug 01, 2016 10:16 pm
by aeon
Saw stage 2 of this up close for the first time and while I've never really liked it from a distance I think the Torrens and Morphett St sides actually work really well. Larger photos here - http://imgur.com/a/TryIN

Image

Image

Image

Image

Image

Image

Image

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Tue Aug 02, 2016 9:21 pm
by aeon
And some of stage 3. Larger here - http://imgur.com/a/Rty1C

Image

Image

Image

Image

Image

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Wed Aug 03, 2016 5:13 pm
by Llessur2002
Wrapping's off on the east side! Looks coppery. I like.

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Wed Aug 03, 2016 6:00 pm
by Llessur2002
Sorry about the quality - my phone's off 2009. Frankly I'm lucky it does pictures.

Image

Was hard to tell exactly what the finish was but it certinly looks metallic - like the front of the Oval but possibly a bit lighter (might weather darker over time I guess). Will cycle past it on the way to work in the morning to see how it looks in the sun!

Link to larger image if you want to zoom in and marvel at its graininess: http://i.imgur.com/rrKkePr.jpg

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Thu Aug 04, 2016 8:22 am
by Llessur2002
Popped past this morning for another look. It's good - definitely a metallic finish of some sorts, not over-the-top shiny but it has a sheen to it. Looks like copper to me but not being a metallurgist that'll be the extent of my analysis for now. It picks up the light nicely, should look good in my opinion.

Image
http://i.imgur.com/V1dhwwa.jpg

Image
http://i.imgur.com/YJ3cfbx.jpg

Hopefully someone with a better camera will come along shortly...

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Thu Aug 04, 2016 3:16 pm
by I Follow PAFC
From https://www.facebook.com/AdelaideConventionCentre/
Image

The Adelaide Convention Centre's Stage Two expansion has reached a milestone, with the zinc panelling exterior installed on the East Building this week. Woods Bagot principal Stuart Uren explains: "Zinc proved to be the perfect cladding material for this building. It is long lasting and malleable, able to follow the curved, folded shapes of the building. Zinc is a plentiful resource, it is non-toxic and is 100% recyclable."

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Thu Aug 04, 2016 3:22 pm
by rhino
So ...... Zinc .....

[COM] Re: Adelaide Convention Centre - Stage 3 | $350m

Posted: Thu Aug 04, 2016 3:43 pm
by Llessur2002
I don't zinc it looks bad.

*chortle*